Hotline: (028)38 722 777 -  096 971 6035  
091 679 4617  Email: info@boschvietnam.vn
Module Bàn Phím Bàn Gọi PRS-CSKPM

Module Bàn Phím Bàn Gọi PRS-CSKPM


Chi tiết
Bàn Gọi Cơ Sở LBB4432/00

Bàn Gọi Cơ Sở LBB4432/00


Chi tiết
Amly Công Suất LBB4428/00

Amly Công Suất LBB4428/00


Chi tiết
Giao Diện Cho Bàn Gọi PRS-CSI

Giao Diện Cho Bàn Gọi PRS-CSI


Chi tiết
Bàn Gọi Điều Khiển Từ Xa PRS-CSR

Bàn Gọi Điều Khiển Từ Xa PRS-CSR


Chi tiết
Bàn Phím Số PRS-CSNKP

Bàn Phím Số PRS-CSNKP


Chi tiết
Bàn Phím Cho Bàn Gọi LBB4432/00

Bàn Phím Cho Bàn Gọi LBB4432/00


Chi tiết
Amply Công Suất PRS-1P500/PRS-4P125/PRS-2P250/PRS-8B060

Amply Công Suất PRS-1P500/PRS-4P125/PRS-2P250/PRS-8B060


Chi tiết
Phần Mềm PRS-SW Praesideo cho PRS-NCO-B

Phần Mềm PRS-SW Praesideo cho PRS-NCO-B


Chi tiết
Nút Nhất Khẩn Cấp PVA-1EB

Nút Nhất Khẩn Cấp PVA-1EB


Chi tiết
Khóa Cho Bàn Gọi PVA-1KS

Khóa Cho Bàn Gọi PVA-1KS


Chi tiết
Board Giám Sát Đường Dây PVA-1WEOL

Board Giám Sát Đường Dây PVA-1WEOL


Chi tiết
Bộ bàn gọi mở rộng  PVA-CSK

Bộ bàn gọi mở rộng PVA-CSK


Chi tiết
Bàn Phím Mở Rộng Cho Bàn Gọi PVA-20CSE

Bàn Phím Mở Rộng Cho Bàn Gọi PVA-20CSE


Chi tiết
Bàn Gọi Chọn Vùng PVA-15CST

Bàn Gọi Chọn Vùng PVA-15CST


Chi tiết
Amply Công Suất 2x500W PVA-2P500

Amply Công Suất 2x500W PVA-2P500


Chi tiết
Bộ Mở Rộng 24 Vùng PVA-4R24

Bộ Mở Rộng 24 Vùng PVA-4R24


Chi tiết
Bộ Điều Khiển Trung Tâm 12 Vùng PVA-4CR12

Bộ Điều Khiển Trung Tâm 12 Vùng PVA-4CR12


Chi tiết
Bộ sạc PLN-24CH12/48CH12

Bộ sạc PLN-24CH12/48CH12


Chi tiết
Bộ Chuyển Mạch PRS-CRF

Bộ Chuyển Mạch PRS-CRF


Chi tiết
Module Bàn Phím Bàn Gọi PRS-CSKPM
The call station keypad module is used in combination with a basic or remote call station module to make manual or pre-recorded announcements to any assigned zones, or to execute pre-defined actions. It is functionally equivalent to the LBB 4432/00 Call Station Keypad. One of the main applications is the development of fireman’s panels. However, since the call station keypad has eight programmable input connections, each with two associated output connections, it is also suited for other control applications.
Bàn Gọi Cơ Sở LBB4432/00
Amly Công Suất LBB4428/00
There are four types of Power Amplifier units in the
Praesideo product range. These differ in the number of
amplifier channels per frame: one, two, four, or eight. The
overall power rating is 500 watts for all of the amplifier
Giao Diện Cho Bàn Gọi PRS-CSI
The PRS‑CSI is an interface between a single remote call
station, PRS‑CSR, or a remote call station kit, PRS‑CSRK,
and the fiber optical Praesideo network. It uses CAT-5
cable for the connection to the remote call station. The
CAT‑5 cable, carrying digital audio and control data, can be
as long as 1 km. The length of the CAT‑5 cable is not a
part of the Praesideo optical network length. This
considerably increases the overall possible length of the
optical network, especially in cases, where the call station
is located far from the rest of the system
Bàn Gọi Điều Khiển Từ Xa PRS-CSR
he PRS‑CSR is a call station with the same functionality
as the basic call station, LBB 4430/00, but it uses CAT-5
cable for its connection to the Praesideo network. It
connects, one-to-one, to the call station interface,
PRS‑CSI, which is part of the Praesideo optical network.
The CAT-5 cable, carrying digital audio and control data,
can be as long as 1 km. The length of the CAT-5 cable is
not a part of the Praesideo optical network length. This
considerably increases the overall possible length of the
optical network
Bàn Phím Số PRS-CSNKP
The Call‑Station Numeric Keypad is used in combination
with a basic or remote call‑station. The call‑station
provides the microphone and press‑to‑talk key, while the
numeric keypad can be used for user access, zone and
zone group selection. It works together with call‑station
keypads for pre‑configured actions. The built‑in LCD
provides feedback to the user
Bàn Phím Cho Bàn Gọi LBB4432/00
The call station keypad is used in combination with the call
station basic to make manual or pre-recorded
announcements to any assigned zones, to select the zones
or to execute pre-defined actions. The call station keypad
has eight programmable buttons, each with a two-color
status LED
Amply Công Suất PRS-1P500/PRS-4P125/PRS-2P250/PRS-8B060
There are four types of Power Amplifier units in the Praesideo product range. These differ in the number of amplifier channels per frame: one, two, four, or eight. The overall power rating is 500 watts for all of the amplifiers.The Power Amplifiers can be set to 100 V, 70 V and 50 V output tappings. They have short-to-ground and short-circuit detection functions, and can generate their own pilot tone for supervision purposes
Phần Mềm PRS-SW Praesideo cho PRS-NCO-B
This software has three parts:
• Configuration software, which is installed in the network controller
• Diagnostic & logging software, which is installed in the network controller, and optionally on a logging PC
• File transfer software, which is to be installed on the configuration PC and supplied together with the network controller
Nút Nhất Khẩn Cấp PVA-1EB

The PVA-1EB is an optional button for installation in the PAVIRO call stations. For more information, see the call station documentation or IRIS-Net documentation.
Khóa Cho Bàn Gọi PVA-1KS
The PVA-1KS is an optional key switch for installation in the PAVIRO call stations. The feed lines of the key switch are monitored for short-circuits and interruptions. For more information, see the call station manual.
Board Giám Sát Đường Dây PVA-1WEOL
The End Of Line (EOL) Slave Module monitors the integrity of a loudspeaker line. In combination with an EOL master, integrated in every Controller and Router of the PAVIRO system, the loudspeaker line can be monitored against short-circuit or open-circuit.
Bộ bàn gọi mở rộng PVA-CSK
The PVA-CSK call station kit is a call station printed circuit board (PCB) for the PAVIRO system. The circuit board allows an application-specific call station to be installed, such as a fire department call station.

Bàn Phím Mở Rộng Cho Bàn Gọi PVA-20CSE
The PVA-20CSE is a call station extension for the PAVIRO system. The call station extension has 20
customizable selection buttons. A maximum of five call station extensions can be installed on one call station.
Bàn Gọi Chọn Vùng PVA-15CST
The PVA-15CST is a call station for the PAVIRO system. As standard, the call station has a gooseneck microphone with pop shield and permanent monitoring, a total of 20 buttons, an illuminated LC display, and an integrated loudspeaker. The call station can be modified to suit the user’s requirements by connecting up to five PVA-20CSE call station extensions, each with 20 customizable selection buttons
Amply Công Suất 2x500W PVA-2P500
The PVA-2P500 class-D amplifier is a 2 ✕ 500 W professional audio amplifier for evacuation purposes. It can be operated from both the mains and a DC supply. The output voltage is galvanically insulated and is constantly monitored for ground fault.
Bộ Mở Rộng 24 Vùng PVA-4R24
24-strefowy ruter PVA-4R24 jest strefowym rozszerzeniem systemu PAVIRO. PVA-4R24 rozszerza system o 24 strefy, 20 GPI, 24 GPO oraz dwa przekaźniki sterujące, jest sterowany i nadzorowany za pośrednictwem magistrali CAN przez moduł PVA-4CR12 (sterownik).
Bộ Điều Khiển Trung Tâm 12 Vùng PVA-4CR12
​The PVA-4CR12 controller is the central paging manager
for the PAVIRO system. Eight local audio inputs can be
switched to four audio outputs. A two channel message
manager is integrated. The controller provides all the audio
processing, supervision and control functions for a
complete PAVIRO system
Bộ sạc PLN-24CH12/48CH12
The PLN‑24CH12 and PRS‑48CH12 Battery Chargers
are designed for public address and emergency sound
systems, to assure that the system batteries are
always charged. Rack mountable, the unit charges
lead‑acid batteries and simultaneously provides 24 V
or 48 V for system components that use 24 V or 48 V
exclusively. These chargers are fully compliant and
certified to EN 54‑4. The battery chargers are premium
quality, intelligent, microprocessor controlled devices
Bộ Chuyển Mạch PRS-CRF
The Call Stacker is a small unit that records calls that
cannot be sent to all required zones because some are
occupied by a higher priority call. The unit can store
up to 16 calls in high‑quality format with a maximum of
three minutes for each call, including chimes and
pre‑recorded messages. Playback of a call can start
while it is still being recorded.